BXGHT - MORIN, DIHYDRATE, R345
- MSDS: BXGHT
- Manufacturer: J T BAKER INC
- Product Name: MORIN, DIHYDRATE, R345
- National Stock Number: 6810-00N058930
Product Identification
Product ID:MORIN, DIHYDRATE, R345
MSDS Date:05/01/1989
FSC:6810
NIIN:00N058930
MSDS Number: BXGHT
Responsible Party
PHILLIPSBURG, NJ 08865
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
(MORIN, DIHYDRATE)
CAS: 480-16-0
RTECS: LD8749000
Fraction By Weight: 90-100%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYE:IRRITATION. INHALATION/SKIN
ABSORPTION/INGESTION:NONE IDENTIFIED. CHRONIC:NONE IDENTIFIED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:INGESTION:CALL A PHYSICIAN. IF SWALLOWED, IF CONSCIOUS,
IMMEDIATELY INDUCE VOMITING. INHALATION:REMOVE TO FRESH AIR. IF NOT
BREATHING, GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT,
GIVE OXYG EN. SKIN:FLUSH WITH WATER. EYES:IMMEDIATELY FLUSH WITH
PLENTY OF WATER FOR AT LEAST 15 MINUTES.
Fire Fighting
Flash Point Method:CC
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NOTE:DECOMPOSES AT MELTING POINT. TOX
GASES PRODUCED:CARBON MONOXIDE, CARBON DIOXIDE.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE CLOTHING. WITH CLEAN
SHOVEL, CAREFULLY PLACE MATERIAL INTO CLEAN, DRY CONTAINER AND
COVER; REMOVE FROM AREA. FLUSH SPILL AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CNTNR TIGHTLY CLSD. SUITABLE FOR
ANY GEN CHEM STOR AREA. CONT W/COMBUST MATLS, FLAM MATLS/POWDERED
METALS CAN CAUSE FIRE/EXPLO.
Other Precautions:WARNING! CAUSES IRRIT. STRONG OXIDIZER. KEEP FROM
CONT W/CLTHG & OTHER COMBUST MATLS. DO NOT STORE NEAR COMBUST
MATLS. DO NOT GET IN EYES, ON SKIN/CLTHG. DO NOT BRTHE DUST. KEEP
IN TIGHTLY CLSD CNTNR. USE W/ADEQ VENT. IN CASE OF (SUPP DATA)
Exposure Controls
Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION IS HIGH, USE AN
NIOSH/MSHA APPROVED APPROPRIATE RESPIRATOR OR DUST MASK.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
FUME OR DUST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:UNIFORM IS RECOMMENDED.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
OTHER PREC:FIRE, SOAK WITH WATER. IN CASE OF SPILL, SWEEP UP AND
REMOVE. FLUSH SPILL AREA WITH WATER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:545F,285C
Solubility in Water:NEGLIGIBLE (
Percent Volatiles by Volume:0(21C)
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE DOCUMENTED.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.